How to Use 3D Puff HTV
Here are some Tips and Tricks for this product
Prepping to Cut
Your 3D Puff HTV cuts just like any HTV, mirror shiny side down.
Be sure your cutting machine is on an iron on vinyl setting.
If you do not get a clean cut. You can adjust the pressure to add more if needed.
Weeding your design
You can use a weeding tool to help you remove pieces as needed.
Preparing to Heat Press
Add your Puff design to your apparel or item of choice.
Be sure your heat press is at 300 degrees. You will use low-medium pressure.
First Press
On your First Press- you will add heat for 3 Seconds over the image then Remove from Backing Film.
Go back over your image for a Second Press 10-15 Seconds.
THESE COLORS APPEAR DARK PRIOR TO BEING PRESSED. THE COLOR LIGHTENS AS IT EXPANDS
Wrinkly Puff HTV ?
Here is an example of what your puff htv texture may resemble if you are not able to cover your entire image with your heat press with medium pressure for those first 3 seconds.
New Editions
Check out the newest editions to our 3D puff collection including Neon brights along with Gold and Silver.
Check us out on YouTube
You can watch the "How to" video on how to apply your 3D Puff HTV along with many other JDC product video tutorials. Let's get social as you follow us on Instagram and Facebook. You can browse our awesome selection of Craft Vinyls, HTV and more at www.gojdc.com.